The complete 'Do It Yourself' DELUXE Bed Bug Control Kit. 

Contains:


PROTECT-US INSECTICIDAL DUST

A ready to use dust for the control of cockroaches, ants, fleas, silverfish, bedbugs, and European Wasps as used by professionals. Kills pests on contact, can be applied to difficult to reach places.

Packaged in a convenient ready-to-use puffer pack, Protect-us Insecticidal Dust can be used on a variety of pests including Bed Bugs. Apply powder to bedsteads, bedsprings, mattresses, floor coverings, upholstered furniture, cracks in walls, behind torn wallpaper, joints in woodwork, carpet edges, under & behind skirting boards, bed legs, bedside furniture, electrical sockets and other harbourages.

How to use Protect us Insecticidal Dust for Bed Bugs


BED BUG MONITORS 

Sleep with ease with the new BuggyBeds® Bed Bug Monitor! Early detection is critical in identifying a bed bug problem and key to potentially saving you thousands of dollars from an infestation in your home.

Custom formulated ready-to-use BuggyBeds® monitors that can be placed anywhere in your home. BuggyBeds® specialised non-toxic, pesticide free formula and design is intended to lure bed bugs & other insects into the monitor for detection! For continuous detection, use the monitors to detect bugs before & after professional extermination to insure the effectiveness of the treatment while providing peace of mind. 

Place BuggyBeds® monitors at each corner between mattress and box spring or in between sofa cushions. A simple visual check periodically of your BuggyBeds® monitors will allow you to detect bed bugs early! BuggyBeds® monitors are small and discreet (2" X 3") and can detect up to six months.

How to use Buggy Beds Bed Bug Monitors


BEDLAM AEROSOL SPRAY

Bedlam Aerosol Insecticide is a residual aerosol spray specially designed to control bed bugs, lice, ticks, fleas, and dust mites on contact. Bedlam Aerosol Insecticide may be used as for crack and crevice treatment and on and around baseboards, floorboards, headboards, and walls. This product is water-based and non-irritating, and so it can used to spot treat bedding and mattresses when controlling bed bugs. In addition, the product will not stain water-safe fabrics and surfaces. Bedlam is labelled for use in homes, apartments, schools, hotels and healthcare facilities.

How to use Bedlam Aerosol Insecticide


DELFORCE INSECTCIDE

Insecticide for control of bed bugs and a range of other common insect pests in domestic and commercial situations as per the Directions for Use Table.  Delforce Insecticide is ideal for indoor and outdoor control and can be used in Hand Sprayers, Knapsack Sprayers, Backpack Sprayers, Garden Sprayers & Pressure Sprayers. (See our Sprayers category for the full range)

Apply Delforce to potential bed bug harbourages such as timber flooring, skirting boards, carpet, rugs, carpet edges, bedside furniture, etc. Apply as a fine mist and do not exceed the point of runoff. Delforce can also be used on the bed frame / base. Again apply to potential bed bug harbourages such as ends of timber slats, joins in timber framework, bed legs, headboard, labels, stitching, wheel / castors, etc. Do not spray directly onto mattress or bedding.

How to use Delforce Insecticide for Bed Bugs


BED BUG STEAMER 

Treat and kill Bed Bugs and their eggs instantly! Steam mattresses, furniture, floors, baseboards, cracks and crevices, etc. to kill bed bugs and their eggs.  Multiple accessories make this the most dynamic bed bug steamer in Australia.

Using a bed bug steamer to kill bed bugs and get rid of bed bugs in your home is environmentally safe and highly effective.   Bed bugs cannot tolerate heat, and a bed bug steamer will kill bed bugs on contact.  Even better, steam can penetrate into hard to reach areas and through the cloth wrappers of mattresses and box springs to kill bed bugs hiding inside as well. This Bed Bug Steamer is safe to use on mattresses, furniture, the edges of carpet and beds with wooden slates.

Multiple attachments as well as a handy extension spout enables to get into very tricky and tight locations.

How to use Bed Bug Steamer

Bed Bug Inspection Points

HOW TO GET RID OF BED BUGS

Step 1:Conduct a thorough inspection of the mattress focusing on seams, buttons, zips, and labels. Also check the bed frame or ensemble base focusing on cracks and crevices, bed legs, joins between timber slats, bed heads, etc. Bed bugs may also be found in bedside furniture, picture frames, walls, electrical sockets, carpet edges, curtains, etc. Look for live insects, skin casts, eggs, and 'spotting'. Spotting is the fecal traces (i.e. digested blood) of bed bugs. It is most commonly seen as a series of black spots 0.5mm - 1mm in diameter.

Step 2:Once you have identified that you have bed bugs it is recommended that you carry out a thorough vacuum of all the areas identified above. This will remove live bed bugs and their eggs from these areas. Make sure you dispose of the contents of the vacuum cleaner immediately to prevent spreading the infestation to other areas.

Step 3: Bed Bug Steamer - Use the steamer to treat affected areas or suspected bed bug harbourages on the mattress, bed base, bedside furniture, carpet edges, timber flooring, walls, etc.

Step 4: Bedlam - Treat affected areas using the Bedlam aerosol. Again focus on areas where you have seen live insects, eggs, skin casts, and spotting. Pay particular attention to cracks and crevices.

Step 5: Now you can apply the Protect-Us Insecticidal Dust powder as a light dusting. As above, apply Protect-Us Insecticidal Dust to all the same areas where bed bug activity has been seen. You can also apply the Protect-Us Insecticidal Dust as a preventative treatment by dusting around carpet edges, around the base of bed legs, etc. Do not apply directly to mattress or bedding.

Step 6: Placing the monitors. Place one monitor at each corner of the bed between mattress and base. Check the monitors for bed bug activity every few days. If you see bed bugs in the monitor then more treatment may be necessary.

Step 7: Delforce Residual Insecticide - The Delforce Residual Insecticide comes as a concentrate that needs to be diluted with water in a hand sprayer. For the initial treatment mix 150ml of Delforce with 5 liters of water. Apply as a surface spray (not exceeding the point of run-off) to flooring, around bed legs, carpet edges, skirting boards. Do not spray directly on the mattress or bedding.

Step 8: Finally, we highly suggest you consider mattress and base protectors to complete the treatment. What these do is capture any bed bugs that may still be infesting the mattress or base and prevent them from escaping and biting you or your guests. They also protect against future infestation by removing potential harbourages that new bed bugs may seek out. As a result, you can essentially isolate the mattress and base therefore rule out any chance of these being the source of the problem. Also, mattress and base protectors are a much cheaper alternative to throwing out your existing bed and replacing it with a brand new one!!

Pickups are available with prior arrangements only, please contact us before you come to the warehouse for pick up.

For residential deliveries we request an authority to leave goods in a safe place if customers aren't at home, so a re-delivery fee isn't incurred. To avoid any issues with delivery it is advised to specify a business address.

ORDER VALUE FREIGHT COST - AU  FREIGHT COST - NZ 
$1 - $150 $14.95  $15.95* (up to 2kg only)
>$150  FREE SHIPPING*  **Contact us for pricing**

 

*Some POSTCODES in TAS, WA, NT, SA may incur additonal Freight costs. 

DELIVERY

  • Dispatch of goods is arranged through GO Warehouse
  • Bulk items or  Delivery to remote parts of Australia (TAS, WA, NT, SA)  may incur additional delivery cost
  • Shipping to NZ can be made for up to 2 kg at a flat rate. More than 2kg we will quote the freight for each order.
  • Contact us prior for shipment of chemicals and goods classified as Dangerous - which may require special delivery arrangement & additional postage
  • Please allow up to 7 working days for delivery, although in most cases delivery is within 1-3 days.
  • No weekend or after hours delivery available unless requested.
  • GO Warehouse is not directly liable for any loss, theft, or damage to any goods during the transit.
  • Replacements or repairs of items are sent by prepaid postage.
  • If problems do arise, please contact us, and we will endeavour to resolve any issues.
  • Large parcels won't be processed to delivery in PO BOX address
  • All parcels with be delivered with standard Road freight and authority to leave at premises unless otherwise specified.

Shipping & Delivery

  • Please see the above for shipping costs or contact us for further quote.
  • PICK-UPS ARE AVAILABLE with prior arrangements only!  Please contact us before you come to warehouse pick up.
  • Item will not ship until payment has been received in full.
translation missing: en.general.search.loading